FOR SALE

10-Unit Goss SC/SSC Press

Manufacturer

Goss

Model

Community

Cut-off

22 ¾” (578mm)

Web Width

Maximum designed 35”; currently runs 24” to 33”

Age

1976/1981/1988

Available

Immediately

Folder

• One (1) half and quarter page Goss SSC folder (SSC-538).
• Two (2) under folder web leads.
• One (1) upper former with deck plate, handrail and ladder.

Press Drive

• Fincor drive system consisting of:
• Two (2) Fincor Model 3120 controllers with (wall mounted) with parallel switch box; Model 2191C – 60/75 – 40C; D1049492; and 2192C – 60/75 – 40C; D1049492.
• One (1) 50HP motor (Drive input volts 190/230; drive input amps (187/227).
• One (1) 60HP motor (Drive input volts 190/230; drive input amps (187/227).

Units

• Ten (10) Goss printing units (eight floor position units and two stacked position units) each with manual sidelay registration; manual gear-side circumferential registration; Ebway motorized compensators on Units A, B, C, D, H, J & K; drop down ink fountains on all units (Unit J & K have levers; and the 10-side of F& G have levers).  S/N’s Unit D: 99110177 LB2615 LB2725; Unit C: 99110172; Unit B: 99110173; Unit A: 99110178; Unit F: 99110174; Unit G: 99110176; Unit H 99110175; Unit I 99100428 LB1852; Unit J 10044 LB2497 9910 LB2481; Unit K: 1204 311 LB5270.
• Eight (8) integrated 42” paper roll stands
• Web-tite tensioner on units B & G.

Additional Equipment & Assoc. Parts

• Fourteen (14) paper roll shafts (some air and some are manual).
• All paper roll dollies.
• One (1) manual plate bender.
• Two (2) water circulators (1-way system boxes on units).
• All spare parts and associated connecting components, manuals, drawings and schematics.

Location

Frankfort, Indiana

Press Configuration

Comments

Press is dirty but has been well maintained.  Produced a 6,300 circulation daily and only ran 20-30 hours a week.  Production was terminated due to acquisition by a newspaper group with a larger production facility nearby.  Samples and photos available upon request.