FOR SALE EXCLUSIVELY BY INLAND

8-Unit Goss Community

Manufacturer

Goss

Model

Community

Cut-off

22 ¾” (578mm)

Web Width

Maximum 35”

Age

mid-to-late 1960’s

IPH

Designed for 18,500; normally runs 13,000 to 15,000

Available

Immediately

Folder

·          One (1) half and quarter page SC-142 folder

·          One (1) upper former with decking, handrail and access ladder

·          One (1) under folder web lead

Press Drive

·          One (1) 75HP Fincor model 3120M controller (drive input volts 480; drive input amps 150; 60 cycle)

·          One (1) 75HP Sumitomo motor with blower

Units

·          Eight (8) floor position C-style printing units each with sidelay registration and integrated 40” paper roll stand.  Units B & D have operator side DGM running circumferential registration and Unit G has gear side RCR.  Three (3) units have drop down ink fountains.  S/N’s Unit E: 99352-10 195LB; Unit D: 994158; Unit C 99352-1 195LB; Unit B 99352-8 195LB; Unit A 99412-7 302LB; Unit F 99412-9 302LB; Unit G 99411-10 302LB; Unit H 994132 302LB

Additional Equipment & Assoc. Parts

·          Fourteen (14) paper roll shaft and chucks (some are air, some are manual)

·          (No paper roll dollies)

·          One (1) paper rewinder on Unit G

·          One (1) manual plate bender

·          One (1) Pressroom Products mixer

·          All associated spare parts and connecting components, drawings, manuals, diagrams and schematics.

Location

Sanford, North Carolina

Press Configuration

Press is configured as 5 floor units behind the folder; and 3 floor units to the nose of the folder.

Comments

The press ran an average of 15-20 hours per week.  It is dirty and in need of a good cleaning, however, they have done some refurbishing over the past several years including some plate and blanket cylinder resurfacing, micrometrics, etc.  In particular plate and blanket cylinders are in pretty good condition except for some very slight rust color spots and two bolt marks.